товарни асансьори

Electric Hydraulic Lift– FREIGHT

Maximum load capacity from 200 to 3000 kg
Installed power 2 levels 4 – 5.5 kW
Maximum hydraulic pressure 120 bar
Lifting/lowering speed to 150 mm/sec
Dimensions as per specifications
Length 1000 to 6000 mm
Width 1000 to 6000 mm
Height in a folded position 500 mm
Depth of the hole underneath the machine 0 to 500 mm
Lifting height to 12000 mm
2  levels
Power supply 380v/50Hz
24v operating voltage

1.Smooth start and stop

2.Two speeds of movement

3.Emergency locking during loading/unloading

4.Smooth movement regardless of the position of the load on the platform

5.Hydraulic overload protection

6.Electrical motor overload protection

7.Mechanical protection against rope breakage

8.All parts and aggregates of the lift are manufactured in Bulgaria, Italy, Germany, and Japan

9.Prohibition of movement with open doors

10.Prohibition of opening doors when the platform is not on the same floor

11.Light indication for platform movement

12.Light indication for platform location on floors

13.Possibility of adjusting the platform movement speed within 0 – 15 mm/s

14.Manual control of the platform

15.Floor-checkered steel

16.Hydraulic station with frequency control

17.Automatic positioning at zero level

18.Synchronization of doors and platform

19.Powder-coated metal surfaces of the machine

20.Garage doors to the hoist – from two to six pieces

The Electric Hydraulic Lift – freight complies with:

  • Regulation on Essential Requirements and Conformity Assessment of Machinery – Council of Ministers Decree No. 140 / 19.06.2008
  • BDS EN 1493:2010 – Vehicle lifts;
  • BDS EN 60204-1:2006 – Safety of machinery. Electrical equipment of machines. Part 1: General requirements (IEC 60204-1:2006, with amendments)
  • BDS EN ISO 4413:2011 – Safety of machinery. Hydraulic and pneumatic systems and their components – Requirements for safety and reliability. Hydraulics.
  • BDS EN ISO 12100-2:2011 – Safety of machinery. Basic concepts, general principles for design/development. Part 2: Technical principles (ISO 12100-2:2011)

 

“I declare that I am aware of the responsibility that I bear under Article 313 of the Criminal Code of the Republic of Bulgaria.”

 

Eng. Stoyan Radulov

    Make an inquiry