I.TECHNICAL SPECIFICATION
| 1.GENERAL INFORMATION | ||||
| Manufacturer | “Atlant 2003 “Ltd. | |||
| Model | PD 2500 | |||
| Type | Electro-hydraulic two-column | |||
| Serial No | ||||
| Year of manufacture | ||||
| Designation | Double-row vertical parking of cars | |||
| Type of drive | Electro-hydraulic | |||
|
Permissible environmental conditions -temperature; -humidity -explosion hazard; -fire hazard; -aggressiveness; |
from -20 to +40 оС not higher than 80% No No No |
|||
| Power supply | 220V, 50Hz | |||
| Regulatory documents | “Regulation for the safe operation and technical supervision of lifting equipment“ | |||
| Design documentation |
PD 2500-01-00 КГ, PD 2500-02-00 KG PD 2500-03-00 KG, PD 2500-04-00 KG PD 2500-05-00 KG , PD 2500-06-00 KG PD 2500-07-00 KG, PD 2500-08-00 KG PD 2500-09-00 KG |
|||
| 2.TECHNICAL DATA | ||||
| Load capacity | 2500 KG / 25 kN | |||
| Lifting time | 30 sec | |||
| Height at the rear end | 1,25 m | |||
| Height at the front end | 1,8 m | |||
| Control position | stationary control panel | |||
|
Mode of control -lifting– -lowering- |
Electric via a button Electric via a button |
|||
| FEM 9.511 mode group | 2 m | |||
| Number and location of vehicles | Two, one above the other | |||
| Own mass | 725 kg | |||
| Platform dimensions | 2000х3650 mm | |||
| dimensions of a parking for installation | 3945х2506 mm | |||
| 3.HYDRAULIC STATION | ||||
| Tank capacity | 10 l | |||
| Hydraulic fluid | Hydraulic oil MHP 40 | |||
|
Electric motor: -power -class -voltage -current frequency -rated current -degree of protection -rotation speed |
HYDRAULIC MOTOR 2,2 kW В 220V 50Hz 12,8 A IP 44 2850 min-1 |
|||
|
Hydraulic Cylinder: – Piston diameter – Stroke length – Rod diameter – Working pressure |
60 mm 650 mm 30 mm 14 MPa |
|||
| 4.PLATFORM | ||||
|
Free dimensions: -length -width |
3645 mm 1900 mm |
|||
| Weight | 360 KG | |||
| 5.MATERIALS | ||||
|
-Columns, flanges, longitudinal beams, transverse beams, ears, brackets, planks -axles -loor panels |
S235JR 45Х S235JR |
|||
| 6.FASTENING ELEMENTS | class 8.8 | |||
| 7.SAFETY DEVICES | ||||
|
– Limit switch for a top position -Safety valve in the hydraulic station -Safety throttle valves in the hydraulic system -Fixing beam with pins -Restricted access -Emergency stop button |
yes yes, мах.16,0 MPa yes yes Use with a latchkey. yes |
|||
| 8.DECORATIVE COATINGS | According to the client’s requirements | |||
